I was wondering if there is any single phase line in the PSIM library like the one in MATLAB (Distributed parameter line or PI section)? I actually could find just three phase AC cables but not single phase! Can we use these three phase cables as a single phase one? if yes How? Thanks a lot.
S
Answer by
Saumya Sharma
It seems that PSIM library does not have a single phase distributed parameter line. You may be able to use the three phase AC cables as a single phase one by connecting only one phase, but this may not be ideal for simulation purposes. It is recommended to contact PSIM support for further assistance on this matter.
To use the UC3844 IC in your circuit, you need to follow the manufacturer's datasheet for the IC, which provides information on its pinout, electrical characteristics, and application circuit examples. You can design and implement your circuit according to the specifications provided by the IC manufacturer.
I would like to use a PV Module but when I go to Utilities to change values, Solar Module(physical model) is blocked and it is impossible to select. Help me, please.
Answer by
Swati Dubey
It seems like the Solar Module option in the PSIM utilities might be blocked or unselectable. It is difficult to determine the exact reason without further information. It is recommended to reach out to the PSIM support team or refer to the program's documentation for troubleshooting steps to resolve the issue.
The timer settings and configuration is explain in the Output Instruction Menu. To access this information, go to the installation folder of PSIM, and click on doc folder. locate the Index file then launch it. It whole page is like a user guide. Browse through examples to find out how to set the timer for input and output modes.
Default path for help files: C:\PSIM-in-DOSBox\PSIM\doc
I want to use an infinite while in c block but when I use for example while(1) and run the simulation result doesn't appear in screen at all (even after 10 hours). What's the problem then? Why the stored data wipes out when I use a variable like an array? I'm waiting for your answer.
S
Answer by
Sean Hill
You can get an overview about the basic C block data study using the link posted below. The problem is that no one encountered this issue, therefore it's impossible to provide suggestions about your inquiry.
Whenever I'm connecting a solar panel across boost converter it is not stepping up. But if I place a DC source instead of solar panel then my boost converter is working perfectly. Can you help?
P
Answer by
Pete Clapp
From what it seems, the solar panel is not connected properly across boost converter. Since there isn't a guide or tutorial to help you connect properly the solar panel, I recommend you contact the developers and ask for instructions. You can get in touch with them using the Contact Us page.
Hi, I've installed PSIM V11.1.7_Demo for free. for some examples that I'm trying to run, I receive this error "The number of elements in the circuit has exceeded the limit. You need the PSIM professional version to save or simulate this circuit". Is there any free version which doesn't have this problem? Thanks in advance
I was wondering if there is any single phase line in the PSIM library like the one in MATLAB (Distributed parameter line or PI section)?
I actually could find just three phase AC cables but not single phase! Can we use these three phase cables as a single phase one? if yes How?
Thanks a lot.
It seems that PSIM library does not have a single phase distributed parameter line. You may be able to use the three phase AC cables as a single phase one by connecting only one phase, but this may not be ideal for simulation purposes. It is recommended to contact PSIM support for further assistance on this matter.
To use the UC3844 IC in your circuit, you need to follow the manufacturer's datasheet for the IC, which provides information on its pinout, electrical characteristics, and application circuit examples. You can design and implement your circuit according to the specifications provided by the IC manufacturer.
I would like to use a PV Module but when I go to Utilities to change values, Solar Module(physical model) is blocked and it is impossible to select. Help me, please.
It seems like the Solar Module option in the PSIM utilities might be blocked or unselectable. It is difficult to determine the exact reason without further information. It is recommended to reach out to the PSIM support team or refer to the program's documentation for troubleshooting steps to resolve the issue.
How can I add a 555 timer to PSIM software?
I know it has been a while since you asked.
But you need to get the data sheet of the NE555 and mount the scheme on PSIM.
If it's not possible, what can I use instead?
The timer settings and configuration is explain in the Output Instruction Menu. To access this information, go to the installation folder of PSIM, and click on doc folder. locate the Index file then launch it. It whole page is like a user guide. Browse through examples to find out how to set the timer for input and output modes.
Default path for help files: C:\PSIM-in-DOSBox\PSIM\doc
I want to use an infinite while in c block but when I use for example while(1) and run the simulation result doesn't appear in screen at all (even after 10 hours). What's the problem then? Why the stored data wipes out when I use a variable like an array? I'm waiting for your answer.
You can get an overview about the basic C block data study using the link posted below. The problem is that no one encountered this issue, therefore it's impossible to provide suggestions about your inquiry.
Sample: http://powersimtech.com/products/psim/c-block-capabilities/
However, I recommend checking the Support area of the website where you can download documents and user guides to see how to work with the program.
Support page: http://powersimtech.com/support/
Whenever I'm connecting a solar panel across boost converter it is not stepping up. But if I place a DC source instead of solar panel then my boost converter is working perfectly. Can you help?
From what it seems, the solar panel is not connected properly across boost converter. Since there isn't a guide or tutorial to help you connect properly the solar panel, I recommend you contact the developers and ask for instructions. You can get in touch with them using the Contact Us page.
No, PSIM is not compatible with Mac OS.
Hi,
I've installed PSIM V11.1.7_Demo for free. for some examples that I'm trying to run, I receive this error "The number of elements in the circuit has exceeded the limit. You need the PSIM professional version to save or simulate this circuit".
Is there any free version which doesn't have this problem?
Thanks in advance